Husqvarna AR19 Bedienungsanleitung PDF herunterladen (Seite 31)

English – 29

6. Undo the hex screws, remove them and make

sure not to lose the pulley (3) and the key (4).

7. Refit the components per the instructions above

(but in reverse order).

8. Adjust the drive belt and align the pulley (see

chapter ”Maintenance/Replacing and aligning

the drive belt”).

Replacing the engine

1. Remove the weights to improve access.

2. Remove the drive guard cover (1).

3. Remove the drive belt.

4. Remove the four engine screws (2). Two on

each side.

5. Remove the engine from the unit.

IMPORTANT INFORMATION

Lawn aerators of model AR25 have two pairs

of shim plates under the engine.

MAINTENANCE

Replacing the clutch cable

1. Turn off the engine and remove the old clutch

cable.

2. Insert the new cable through the hole in the rear

of the cowling.

3. Attach the lower end of the clutch cable to the

mounting on the tensioning pulley spring (see

illustration) and the upper end to the s-hook on

the clutch handle.

4. Adjust the cable length using the nut so that the

clutch spring stretches 19.1–31.2 mm when the

clutch handle is depressed.

8011-218

8011-134

8011-063

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Keine Kommentare

Husqvarna AR19 Bedienungsanleitung Seite 31