Husqvarna 326RJX Bedienungsanleitung

EEEEnnnngggglllliiiisssshhhh 326RJX Oper ator’s manual (EPA) Please r ead the operator’s manual carefully and make sure you understand the instructi

10 – EnglishSAFETY INSTRUCTIONS• The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storag

English – 11SAFETY INSTRUCTIONSGrass trimming using a trimmer head and plastic bladesTrimming• Hold the trimmer head just above the ground at an angle

12 – EnglishWHAT IS WHAT?What is what on the trimmer?282927¥=¢1 Trimmer head2 Grease filler cap3 Bevel gear4 Cutting attachment guard5 Shaft6 Loop hand

English – 13ASSEMBLYFitting the J-handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaf

14 – EnglishASSEMBLYFitting the blade guard/combination guard, grass blade and grass cutter• Hook the blade guard/combination guard (A) onto the fittin

English – 15FUEL HANDLINGFuelCAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-st

16 – EnglishSTARTING AND STOPPINGCheck before startingFor safety reasons follow these recommendations!• Check the blade to ensure that no cracks have

English – 17STARTING AND STOPPINGAir purge: Press the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be

18 – EnglishMAINTENANCECarburettorYour Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the

English – 19MAINTENANCEwill run smoothly in every position. The idle speed should also be well below the speed at which the cutting attachment starts

2 – English KEY T O SYMBOLS Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in s

20 – EnglishMAINTENANCECooling systemTo keep the working temperature as low as possible the machine is equipped with a cooling system.The cooling syst

English – 21MAINTENANCEBevel gearThe bevel gear is filled with the right quantity of grease at the factory. However, before using the machine you shoul

22 – EnglishTECHNICAL DATATechnical dataNOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approv

English – 23FEDERAL EMISSION CONTROL WARRANTY STATEMENTYOUR WARRANTY RIGHTS AND OBLIGATIONSThe EPA (The US Environmental Protection Agency), Environme

1Super Auto IISuper Auto II 123456789104,0 m 13'2,4 mm.095"~2,0 m6,5'6"6""15 cm15 cm

1Trimmy H II234567897,5 m 25'2,0-2,4 mm.080-.095"12 15 cm 6"~ 3,7 m 12' 15 cm 6"

1Trimmy Hit234567891011“Click”“Click”7,0 m 23'" 12 cm 5"~ 3,5 m 11'15 cm 6""2,0-2,4 mm.080-.095~ 15 cm

1Trimmy Hit Pro2567891012“Click”347,5 m 25'2,0-2,4 mm.080-.095"15 cm 6"~ 3,7 m 12'1.)2.)1115 cm 6"15 cm 6&qu

T35"Clic"12356798,5 m28'484,3 m14'2,4-2,7 mm.095-.106"10 cm 4"6"15 cm

English – 3 CONTENTS Contents Note the f ollowing before starting: Husqv arna AB has a policy of continuous product development and therefore reser

´®z+H8Q¶5(¨´®z+H8Q¶5(¨"Clic"12356710118,5 m28'484,2 m14'2,4-2,7 mm.095-.106"10 cm 4"6"15 cmS35

12432,4-2,7 mm.095-.106"4,25 m14'4,25 m14'B6"15 cmA6"15 cmS355

´®z+H8Q¶5(¨2003-11-18´®z+H8Q¶5(¨1140244-95

4 – English SAFETY INSTR UCTIONS P ersonal protective equipment GLO VESGloves should be worn when necessary, e.g., when fitting cutting attachments.

English – 5 SAFETY INSTR UCTIONS Vibration damping system Y our machine is equipped with a vibration damping system that is designed to minimize vi

6 – English SAFETY INSTR UCTIONS Chec king, maintaining and servicing the machine ′′′′ s safety equipment Thr ottle lock • Make sure the throttle

English – 7SAFETY INSTRUCTIONS• Regularly check that the muffler is securely attached to the machine.• If the muffler on your machine is fitted with a sp

8 – EnglishSAFETY INSTRUCTIONSCutting equipmentSharpening grass cutters and grass blades• See the cutting attachment packaging for correct sharpening

English – 9SAFETY INSTRUCTIONSGeneral safety precautionsStarting• The complete clutch cover and shaft must be fitted before the machine is started, oth