Husqvarna WS 440 HF Bedienungsanleitung

HUSQVARNA CONSTRUCTION PRODUCTSGB ES DE FROperator’s manual Please read the operator’s manual carefully and make sure you understand the instructions

10 – EnglishASSEMBLYFit the blade1 Start by removing any dirt from the contact surfaces on the blade flange and blade.2 Check the blade’s direction of

English – 11ASSEMBLYFit the blade guard1 Slip in the blade guard guide between the stays on the blade guard. Place the blade guard guide in the middl

12 – EnglishSTARTING AND STOPPINGBefore starting• Enclose the area to be cut so that unauthorised persons can not be injured or disturb the operator.•

English – 13SETTINGS AND ADJUSTMENTSAdjusting the guide wheelsIn order for the saw to run stably and saw a straight cut, the four guide wheels must re

14 – EnglishMAINTENANCEServiceAfter 100 hours of operation, the message "Time for servicing" is displayed. The entire equipment shall then

English – 15TECHNICAL DATAWS 440 HFMax. peripheral speed, m/s*Recommended blade size. Never use blades other than original blades designed for the mac

16 – EnglishTECHNICAL DATAEC-declaration of conformityHusqvarna Construction Products, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under

www.husqvarnacp.com1151107-202008-02-20´®z+S*h¶0p¨´®z+S*h¶0p¨

2 – EnglishKEY TO SYMBOLSSymbols on the machine:WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause seriou

English – 3CONTENTSContentsKEY TO SYMBOLSSymbols on the machine: ... 2Symbols in the operator’s manual: ...

4 – EnglishWHAT IS WHAT?What is what on the wall saw?1 Saw unit2 Cutting arm3 Propulsion engine, blade4 Cable connection5 Protective cover6 Handle/bla

English – 5SAFETY INSTRUCTIONSSteps before using a new wall saw• Please read the operator’s manual carefully and make sure you understand the instruct

6 – EnglishSAFETY INSTRUCTIONSGeneral safety precautionsDo not use the machine without first reading and understanding the contents of this Operator’s

English – 7SAFETY INSTRUCTIONS• Always check and mark out where gas pipes are routed. Cutting close to gas pipes always entails danger. Make sure that

8 – EnglishPRESENTATIONWS 440 HFIt is our wish that you will be satisfied with your product and that it will be your companion for a long time. Think o

English – 9ASSEMBLYMount wall mountings and railFit the wall mounting as set out below:1 Mark off the cutting line and mark off the expander bolts hol