Husqvarna 445e TrioBrake Bedienungsanleitung PDF herunterladen (Seite 31)

MAINTENANCE

English

–

Checking the inertia brake release

With the engine turned off, hold the chain saw over a

stump or other ﬁrm object. Let go of the front handle so

that the bar drops towards the stump as the chain saw

rotates around the rear handle.

When the bar hits the stump the brake should be

applied.

Checking the right-hand brake trigger

Check that the right hand guard is not damaged and that

there are no visible defects, such as cracks.

Push the trigger up and forwards to check that it moves

freely and is securely hinged to the clutch cover.

Never carry or hang the saw by the trigger! This could

damage the mechanism and disable the chain brake.

Checking the brake trigger

Place the chain saw on ﬁrm ground and start it. Make sure

the chain does not touch the ground or any other object.

See the instructions under the heading Start and stop.

Grasp the chain saw ﬁrmly, wrapping your ﬁngers and

thumbs around the handles.

Apply full throttle and activate the chain brake by tilting

your left wrist forward onto the front hand guard. Do not let

go of the front handle.

The chain should stop

immediately.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Keine Kommentare

Husqvarna 445e TrioBrake Bedienungsanleitung Seite 31