Operator´s manualRider 155Rider 155 AWDPlease read these instructions carefully and make sureyou understand them before using the machine.English
8 – EnglishEXPLANATION OF SYMBOLS AND DECALS8009-442Placards
English – 9General Operation• Read, understand, and follow all instructions onthe machine and in the manual before starting.• Do not put hands or feet
10 – EnglishSAFETY INSTRUCTIONS• Disengage blades when not mowing. Shut offengine and wait for all parts to come to acomplete stop before cleaning the
English – 11Personal Safety EquipmentWARNING!When using the machine, approved personal protective equipment (shown inillustrations) shall be used. Per
12 – English• Use extra care while operating machine withgrass catchers or other attachments; they canaffect the stability of the machine. Do not use
English – 13MaintenanceSafe Handling of GasolineTo avoid personal injury or property damage,use extreme care in handling gasoline.Gasoline is extremel
14 – EnglishSAFETY INSTRUCTIONS• Never operate machine in a closed area.• Keep all nuts and bolts tight to be sure theequipment is in safe working con
English – 15SAFETY INSTRUCTIONS• Acid in the eyes can cause blindness, contact adoctor immediately.• Be careful when servicing the battery. Explosiveg
16 – EnglishSAFETY INSTRUCTIONS• Never make adjustments with the enginerunning.• The machine is tested and approved only withthe equipment originally
English – 17SAFETY INSTRUCTIONSCustomer responsibilities• Read and observe the safety rules.• Follow a regular schedule in maintaining, caringfor and
18 – EnglishCongratulations on your choice of a top qualityproduct which you will enjoy for many years.This operator’s manual describes Rider 155 andR
English – 19CONTROLSThrottle and Choke leverThe engine speed is adjusted with the throttlecontrol, and thereby also the rotation speed of theblades.Th
20 – EnglishCONTROLSCutting unitRider 155 and Rider 155 AWD are equipped with acutting unit.Combi - 1030 mm/41"See ”Maintenance \ Checking the Bl
English – 21CONTROLSSeatThe seat has a jointed attachment on the frontedge and can be tipped forward.The seat can also be adjusted lengthways.Release
22 – EnglishBefore starting• Read the safety instructions and information onthe location and function of the controls beforestarting (see pages 5-14).
English – 23OPERATIONWarm engine:4. Set the throttle control midway between position1 and 2.6. When the engine has started immediatelyrelease the igni
24 – EnglishOPERATION8011-642Jumper cables connectionWARNING!Lead-acid batteries generateexplosive gases. Keep sparks,flame and smoking materialsaway
English – 25OPERATIONRunning1. Release the parking brake by pressing down theparking brake pedeal and then releasing it.3. Select the required cutting
26 – EnglishMowing patternOPERATION4. Push in the lock button on the lift lever andlower down the cutting unit.WARNING!Clear the lawn from stones ando
English – 27OPERATIONStopping the enginePreferably allow the engine to idle for a minute toobtain normal working temperature before stoppingit if it h
English – 1Operator’s Manual forRider 155 and Rider 155 AWDCONTENTSWARNING!Failure to follow cautious operating practices can result in serious injury
28 – EnglishPro 155 AWD has one control for the front axle andone control for the rear axle.Pull the controls to their end positions. Do not usean int
English – 29MAINTENANCEWARNING!No service procedures must be conducted on the engine or cutting unit unless:• The engine is switched off.• The ignitio
30 – EnglishMAINTENANCEIMPORTANT INFORMATIONAvoid using a high pressure washer or asteam cleaner8009-741Cleaning and washingClean the machine directly
English – 31Dismantling of the machine hoodsEngine hoodThe engine is accessible for servicing when theengine hood is lifted up.Tilt the seat forward,
32 – EnglishChecking and adjustment of thesteering wiresThe steering is controlled by means of wires.These can in time become slack, which implies tha
English – 33Adjusting the parking brakeThe parking brake is adjusted as follows:1. Loosen the locking nuts (1).2. Tension the cable using the adjuster
34 – EnglishMAINTENANCEAdjusting the throttle wireIf the engine does not respond as it should do whenthe throttle lever is moved or if the top speed i
English – 35Replacing the air filterIf the engine seems to lack power or goesirregularly the reason may be that the air filter isclogged.It is therefo
36 – EnglishMAINTENANCEWARNING!Procedures on contact with acidExternal: Rinse well with plenty of water.Internal: Drink large quantities of water ormi
English – 37MAINTENANCEIgnition systemThe engine is equipped with an electronic ignition system. Only the spark plug requires maintenance.For recommen
2 – EnglishINTRODUCTIONIntroductionCongratulationsThank you for purchasing a Husqvarna ride-on mower. This machine is built for the greatest efficienc
38 – EnglishMAINTENANCEChecking the safety systemThe machin is equipped with a safety system thatprevents starting or driving under the followingcondi
English – 39MAINTENANCECheck the engine’s cooling air intakeClean the air intake grille in the engine coverbehind the driver’s seat.Fold open the engi
40 – EnglishMAINTENANCE123Fitting the cutting unit1. Place the Rider on a flat surface and apply theparking brake. Check that the lever for setting th
English – 41MAINTENANCEChecking and adjustment of the cuttingunit’s ground pressureTo achieve the best cutting results the cutting unitshould follow t
42 – EnglishMAINTENANCEWARNING!Wear protective glasses whendismantling the cutting unit. Thespring which tensions up the beltcan go off and cause pers
English – 43MAINTENANCEBelt replacement on the cutting unitOn these cutting units with "collision-proof" blades,the blades are driven by one
44 – EnglishMAINTENANCE3. Remove the two support wheels from under thefront hood.6017-2204. Fit the support wheels on either side of the rearof the cu
English – 45MAINTENANCE6. Place a foot on the front edge of the cutting unitnear the wheel and raise the front edge of theunit to make it easier to re
46 – EnglishMAINTENANCERestoring from service positionTo leave the service position, reverse theprocedures set out in “Placing in the serviceposition”
English – 47MAINTENANCERemoval of BioClip plug (Combi)To change a Combi unit from BioClip function tocutting unit with rear ejection, remove the BioCl
English – 3Good ServiceHusqvarna’s products are sold all over the world and only in specialized retail stores with complete service.This ensures that
48 – EnglishLUBRICATIONChanging the oilThe oil should be changed for the first time after 5hours of running time. Thereafter it should bechanged every
English – 49LUBRICATIONCheck the transmission’s oil level1. Remove the transmission cover. Loosen bothscrews (one on each side) and lift off the trans
50 – EnglishLubricating the belt adjusterThe belt adjuster should be lubricated regularlyusing good quality molybdenum disulphidegrease*.1 nipple fro
English – 51Problem ProcedureEngine will not start. • Fuel tank empty.• Spark Plug defective.• Spark Plug connection defective.• Dirt in carburettor o
52 – EnglishWinter storageAt the end of the season the machine shouldimmediately be put in order for storage, also if it isgoing to stand idle for mor
English – 53Dimensions Rider 155 Rider 155 AWDLength without cutting unit 2020 mm/6.61 ft 2020 mm/6.61 ftWidth without cutting unit 880 mm/2.89 ft 880
54 – EnglishWe reserve the right to change technical specifications without prior notice.Note that no legal claims are valid on the basis of informati
English – 55SERVICEJOURNALWork donePre-delivery service1. Top up battery with acid and recharge for four hours.2. Fit steering wheel, seat and any opt
56 – EnglishSERVICEJOURNALWork doneDate, mileage, stamp, sign´®z+R23¶5L¨
4 – EnglishThese instructions are for your safety. Read them carefully.Safe operation practices for ride-on mowersIMPORTANT!This cutting machine is ca
115 01 81-952005W49´®z+R23¶5L¨
English – 5IV. Service1. Use extra care in handling gasoline and otherfuels. They are flammable and vapours areexplosive.a) Use only an approved cont
6 – EnglishTravel and transport on public roadsCheck the relevant road traffic regulations beforedriving the machine on a public road. If transporting
English – 7These symbols are found on the machine and in the operator’s manual.Study them carefully so that you know what they mean. Read the o
Kommentare zu diesen Handbüchern